General glass lamp lathe, medium series, standard type, horizontal operation.
All lathes are used for thermal processing of glass and lathes, for the enlargement, reduction, and shaping of glass tube products.
Adopting a linear, high-precision wear-resistant guide rail and slider design, the toothed chain synchronous transmission enables the concentric synchronous operation of the lathe to achieve the high precision required for glass processing.
The upper part of the bed is insulated with circulating water to prevent deformation due to heat, thereby achieving stable product quality.
The lathe adopts HT250 all cast iron design, which increases the stability of the machine tool and extends the service life of the lathe.
Equipped with a flame table and an adjustable flame support, it is easy to adjust the flame position during the processing.
| Distance from spindle center to guide rail surface (center height) | 550mm |
| Distance between the two chuck planes of the spindle | 4500mm |
| Spindle aperture (can be determined by the large diameter of the workpiece) | 300、800mm |
| Three jaw clamp can hold workpiece diameter | 300-800mm |
| Electric walking device (fast) | 0-3000mm/min |
| Electric walking device (slow speed) | 0-50mm/min |
| Parallelism of the axis of the left and right headboards to the bed guide rails | ± 0.10 |
| Coaxiality of two main axes | ± 0.10 |
| Left and right headboard jumping | ± 0.10 |
| Spindle speed | 21-210 revolutions per minute |
| Motor power of walking device | 2-Servo 0.75 |
| Main motor power | 2-15 kW (servo) Delta |
| System: Taiwan Delta |
Scan
Home
Tel
Product