All lathes are used for thermal processing of glass and lathes, and for sealing quartz glass tubes.
Adopting a linear, high-precision wear-resistant guide rail and slider design, the toothed chain synchronous transmission enables the concentric synchronous operation of the lathe to achieve the high precision required for glass processing.
The lathe adopts HT250 all cast iron design, which increases the stability of the machine tool and extends the service life of the lathe.
Equipped with a flame table and an adjustable flame support, it is easy to adjust the flame position during the processing.
This product is suitable for large chemical pipelines and large flasks.
| Distance from spindle center to guide rail surface (center height) | 550-750mm |
| Distance between the two chuck planes of the spindle | 4230mm |
| Spindle aperture (can be determined by the large diameter of the workpiece) | 200mm (heavy-duty machine tool with three claws) |
| Three jaw clamp can hold workpiece diameter | 60-680mm |
| Electric walking device (fast) | 0-3000mm/min |
| Electric walking device (slow speed) | 0-50mm/min |
| Parallelism of the axis of the left and right headboards to the bed guide rails | ± 0.10 |
| Coaxiality of two main axes | ± 0.10 |
| Left and right headboard jumping | ± 0.10 |
| Spindle speed (infinite speed regulation) | 21-210 revolutions per minute |
| Motor power of walking device | 2-0.75 kW (servo delta) |
| Main motor power | 2-11 kW (servo delta) |
| System | Taiwan Delta |
Scan
Home
Tel
Product